Laser Edge Goniometer Lite
SKU: GONIOMETER-LITE
AVAILABILITY: Out of Stock
Hurry! Only 0 Left in Stock!
Free Shipping
on orders over $50
Returns in 14 Days
following delivery date
US Customer Support
(470) 227-7960
Laser Goniometer is a tool of measurement of the sharpening angle of knives and scissors. It's the price-wise alternative of expensive equipment invented by CATRA.
Goniometer Lite is an incredibly simple, but sufficiently informative device. It utilizes a built-in laser source powered by one CR2032 battery. You can test knives up to 2" wide. The grind can be symmetric, asymmetric, multi beveled, or convexed. The maximum full angle 80 degrees.
Attention! There is no User's Guide.
To measure the angle for sharpening scissors, you need to place one half of the scissors to the edge of the center angle and move the stop to the angle. Read the data on the laser scale and add 45 degrees.
Models Comparison
Lite |
---|
📐Scale range: -36°...+36° |
📏Scale resolution: 1° = 1.7mm |
🔪Blade capacity: 49mm |
🔋CR2032 battery |
🖐Manual |
Pro |
---|
📐Scale range: -28°...+28° |
📏Scale resolution: 1° = 2.7mm |
🔪Blade capacity: 80mm |
🔋CR2032 battery |
🖐Manual |
Master |
---|
📐Scale range: -44°...+44° |
📏Scale resolution: 1° = 1.8mm |
🔪Blade capacity: 51mm |
🔋Built-in battery with micro USB |
🧲Magnets-assisted |
The photo shows an example of measuring the angle of an OLFA carton cutter described above. Unfortunately, the photo does not exactly match the original, because photographing a laser beam is fairly difficult - the flash distorts it. In reality, it is much clearer and more informative. However, even here you can see not only the basic sharpening angle (bevel towards the cutting edge) but also the secondary bevel, even though it is only 0.12mm wide (measured using a measuring microscope).
SKU: WOODSTONECASE-6
AVAILABILITY: In stock (14 items)
PRODUCT TYPE: Accessories and Tools
VENDOR: Gritomatic
Wooden Storage Case made of plywood holds and protects your Edge Pro stones.The case is compatible with 6" stones mounted or unmounted on aluminum blanks, total thickness up to 12 mm, width from 0.5" (12 mm) to 1" (25 mm)....
SKU: TIAN-ROO-25-GRAY
AVAILABILITY: In stock (5 items)
PRODUCT TYPE: 6" Mounted Strop
VENDOR: Gritomatic
Kangaroo Leather Strop is an efficient way of final polishing a cutting edge using guided knife sharpeners. A leather strop enhances the cutting edge by correcting small nicks and smoothing grooves.The stropping medium is leather pad made of vegetable tanned...
SKU: ANGLEGAUGE2
AVAILABILITY: In stock (401 items)
PRODUCT TYPE: Accessories and Tools
VENDOR: Gritomatic
It's very important to keep a sharpening angle consistent on a guided knife sharpener. The angle should not change when replacing one sharpening stones to another. In order to control the sharpening angle, one measures the angle between the knife plane and the sharpening...
SKU: TIAN-5MM-25-GRAY
AVAILABILITY: In stock (405 items)
PRODUCT TYPE: 6" Empty Blank
VENDOR: Gritomatic
Anodized Aluminum Blanks 160 x 25 x 5mm are used for lapping films and stropping pads on guided knife sharpeners that work with 6" sharpening stones. Blanks are made of high-quality 5mm-thick aluminum with 45-degree bevels (Edge Pro form-factor) and...
SKU: HEXSCREWDRIVER-3MM
AVAILABILITY: In stock (244 items)
PRODUCT TYPE: Accessories and Tools
VENDOR: Gritomatic
Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener on a regular basis, hex screwdrivers will make your...