About Gunny Juice

Gunny Juice Polycrystalline Diamond Suspension is a very effective method of honing and polishing the cutting edge of the knife. Gunny Juice is created through a proprietary deionization process offering agglomerate-free dispersion of diamond particles for submicron grits. In conjunction with a very tight particle size distribution, the process permits scratch-free polishing results.

Gunny Juice is available in many grits in 10 ml and 30 ml volume.

The diamond suspension can be used with any strop made of leather, balsa, or nano cloth.

To use, simply pump the desired amount of suspension on your stropping medium, spread evenly, let dry, then use as usual.

You will not be able to fully remove the compound after applying it to the strop. If you want to use your strop both with and without compound, you must, therefore, keep one side clean. If you want to switch between one compound and another, consider buying an extra strop.

Compound residue accumulates in the leather during stropping. If stropping performance gets worse, remove the residue with a knife spine or special tool, and apply the fresh compound.

Particle Size Distribution

Gunny Juice suspension is based on the premium diamond powder of grain that is strictly controlled. Gunny Juice outperforms requirements of national abrasive standards in all key factors of the particle size distribution, such as median range (D50 tolerance), main range (D5 - D95), and largest particle range (D99). Chinese diamond powder and diamond compounds are made in accordance with JB, Russian and Ukrainian - with GOST, American - with ANSI.

Grand Logarithmic Grit Chart
Questions and Answers
Questions & Answers
avatar
Recent Questions

avatar
Guest  •  27 days ago
avatar
⚙️Leading Edge  •  27 days ago
This depends on what exactly you want to achieve. The reason for such a large selection of grits, is personal preference of what you want to achieve with the specific edge, how refined or polished you like it, what type of strop subsurface you prefer and how regular you want to strop. It also depends on what type of blade you're using, and what your daily EDC use actually entails. Personally for my own EDC use, I like a relatively coarse sharpened edge with bite, normally not stropped. If I do strop a coarse EDC edge, I only briefly and lightly strop on smooth leather with approximately 1 or 0.5 micron paste.
0 | 0
avatar
Guest  •  1 month ago
Is it possible to get the 0.25 gunny juice without the strop? I don't need the strop.
2. When will the 1 mikron gunny juice arrive?

Greets,


Anton, Switzerland
avatar
⚙️Leading Edge  •  1 month ago
This product does not come with a strop, but is currently out of stock. Please contact Gritomatic directly here for stock related questions:

https://www.gritomatic.com/pages/cont...
0 | 0
avatar
Guest  •  9 months ago
Not looking to sharpen or reprofile just weekly maintenance
avatar
⚙️Leading Edge  •  9 months ago
For weekly maintenance, a blank shell cordovan strop is a good choice, without any compound. If your razor needs a slight edge refresh, then a 0.5 micron loaded strop would be a decent choice. Do very light and careful, minimal stropping as this is a diamond compound.
0 | 0
avatar
Guest  •  1 year ago
F.ex Gunny Juice 1 micron
avatar
⚙️Leading Edge  •  1 year ago
I can't think of a reason why it won't work. It's very aggressive, so you'd have to spend the minimum time stripping on your Tormek with a felt wheel. Too much stropping and your edges will round.
0 | 0
avatar
Guest  •  1 year ago
avatar
⚙️Leading Edge  •  1 year ago
Non ionized water based as far as I remember.
0 | 0
avatar
Guest  •  1 year ago
avatar
⚙️Leading Edge  •  1 year ago
If it is very smooth and polished leather, it struggles to adhere. In this case, very light (very smooth sandpaper) sanding like you did will help. After coating the strop, make sure the gunny juice fully dries before using it. Note that you really do not need to have the surface coated fully with a thick layer of compound, so don't be too concerned if some if it comes off after you've coated the stop. It really does not take much compound at all to do a great job.
0 | 0
avatar
Guest  •  1 year ago
avatar
⚙️Leading Edge  •  1 year ago
This information is not provided by the manufacturer, but the percentage is very high and enables it to work exceedingly well.
0 | 0
View all
view